Sliding folding doors
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Sed eu ligula pretium, pellentesque nibh et, ullamcorper sapien. Suspendisse efficitur bibendum quam, eu cursus magna hendrerit eget. Suspendisse fermentum dui et sapien varius tincidunt. Nam mollis turpis et nulla gravida varius. Duis facilisis sagittis nunc eget vestibulum. Mauris non elementum justo, et tincidunt mi. Morbi iaculis leo felis, vestibulum dignissim ipsum eleifend sit amet. Vestibulum vitae ex porttitor, malesuada tortor in, porttitor nulla.
ROBUST AL602SF
A SLIDING FOLDING DOOR IS ALWAYS THE RIGHT CHOICE.
Regardless of how different the relevant structures and the requirements are.
The applications of sliding folding doors range from small truck garage doors to gigantic aircraft hangar doors.
Information
GENERAL INFORMATION
Aluminium sliding folding door with frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm.
Steel side trackage for the folding of door leaves next to the clearance opening.
Frame profiles are connected to the leaf of a folding door by means of double bolts.
Pressed-in aluminium component as a static connecting element.
50 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass.
The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.
All of the door components can be replaced easily without damaging other components!
Implementation mostly as a power-operated, electric sliding folding door.
SIZES
– maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm)
– maximum height of door leaves: 5600 mm
GLAZING
Insulating tempered glass of up to 2 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.
PANELS
1 mm thick steel sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.
SURFACE FINISH
– powder-coated with façade quality, standard colour of your choice
– anodised with A6/C0
OPERATION
– manually operated
– power-operated with folding door drive BASIC
Tekniske specifikationer
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GUIDE RAIL WITH ROLLER UNITS
The door face consists of individual, freely movable door leaves that are connected to each other by means of special hinges. When the door is opened, the door leaves that are positioned next to each other are pushed to the sides. Outside of the clearance width, the door leaves are guided by side trackage that is responsible for folding the door leaves.
THERMO AL603SF
THE THERMALLY SEPARATED SLIDING FOLDING DOOR.
Even in the case of large door widths, it meets the requirements regarding heat insulation and stability.
Information
GENERAL INFORMATION
Aluminium sliding folding door with thermally-separated frame-lattice design. Design depth of 60 mm.
Wall thickness of at least 2 mm. Steel side trackage for the folding of door leaves next to the clearance opening.
Frame profiles are bolted together and glued to the leaves of the folding door using mitres.
50 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass.
The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.
Implementation mostly as a power-operated, electric sliding folding door.
SIZES
– maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm)
– maximum height of door leaves: 5600 mm
GLAZING
Insulating tempered glass of up to 2 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.
PANELS
1 mm thick aluminium sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GUIDE RAIL WITH ROLLER UNITS
The door face consists of individual, freely movable door leaves that are connected to each other by means of special hinges. When the door is opened, the door leaves that are positioned next to each other are pushed to the sides. Outside of the clearance width, the door leaves are guided by side trackage that is responsible for folding the door leaves.
STRONG ST602SF
ELEGANT – ROBUST – VARIABLE
This defines the sliding folding door ST602SF.
Information
GENERAL INFORMATION
Steel sliding folding door with frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm.
Steel side trackage for the folding of door leaves next to the clearance opening.
Frame profiles are connected to the leaves of the folding door using mitres and by means of brazing.
50 mm finger-pinch protective rubber between the door leaves. Panels made of steel or insulating glass.
The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.
Implementation mostly as a power-operated, electric sliding folding door.
SIZES
– maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm)
– maximum height of door leaves: 7000 mm
GLAZING
Insulating tempered glass of up to 4 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.
PANELS
1 mm thick steel sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.
SURFACE FINISH
– powder-coated with façade quality, standard colour of your choice
OPERATION
– manually operated
– power-operated with sliding folding door drive
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar. Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides.
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GUIDE RAIL WITH ROLLER UNITS
The door face consists of individual, freely movable door leaves that are connected to each other by means of special hinges. When the door is opened, the door leaves that are positioned next to each other are pushed to the sides. Outside of the clearance width, the door leaves are guided by side trackage that is responsible for folding the door leaves.
HAR DU BRUG FOR HJÆLP?
Kan du ikke finde det du søger på vores hjemmeside eller har du noget specielt, du gerne vil tale med en professionel fagmand om – så kontakt os endelig. Vi er behjælpelig med at rådgive og vejlede.